China manufacturer made turning solenoid valve 23D-63B

Date:2023/11/14 9:47:22 Visits: Author:Dongfang YOYIK Engineering Co; Ltd,

China manufacturer made turning solenoid valve 23D-63B

 

DESCRIPTION

 

The turning solenoid valve 23D-63B is designed for turbine steering control. The turning gear is a driving device that drives the rotation of the shaft system before and after the start and stop of the steam turbine generator set. The turning gear is installed on the rear bearing box cover between the turbine and generator.

 

Working principle OF turning solenoid valve 23D-63B

 

The working principle of the turning solenoid valve 23D-63B: When it needs to rotate, first pull out the safety pin, push the handle, and turn the motor coupling until the meshing gear and the rotating gear are fully engaged. When the handle is pushed to the working position, the contact of the travel switch closes and the steering power is turned on. After the motor starts at full speed, it drives the turbine rotor to rotate.

 

REGULAR MODELS

 

AST/OPC solenoid valve coil 300AA00126A
Accumulator bladder NXQ A 10/31.5
sealing oil float tank float valve BYF-40
servo valve G761-3034B
AST solenoid valve SV13-12V-0-0-00
OPC solenoid valve SV4-10V-C-0-00
BLADDER LNXQ-A-10/20 FY
single stage centrifugal pump DFBII80-50-240
generator stator cooling water pump 50-250C
OPC solenoid valve SV13-12V-O-0-00
vacuum pump 30-WS
Servo valve SM4-20(15)57-80/40-10-S182
globe valve SHV20
BLADDER NXQ-A-25/31.5
Bladder NXQ-A-10/20 FY

PRODUCT PICTURE  

 

 

 

 

 

 

 

 

 

Please contact us if your need is not listed above. SEND EMAIL

 

solenoid_valve,turning_solenoid_valve