The fire-resistant oil regeneration alumina filter element 30-150-219 from Nugent is a high-efficiency adsorption filter element designed for fire-resistant oil (phosphate ester type EH oil) regeneration systems in the fields of power, petrochemical, industrial equipment, etc. It uses high-purity activated alumina as the core adsorption medium, combined with a multi-layer composite structure, which can effectively remove acidic substances, moisture and oxidation by-products in fire-resistant oil, restore oil performance, extend service life, and ensure stable operation of equipment.

Model: 30-150-219

Adsorption medium: high-purity activated alumina (Al₂O₃)

Working temperature: -20°C ~ 120°C

Maximum pressure difference: ≤0.5 MPa

Applicable oil: phosphate ester fire-resistant oil

 

Power industry: steam turbine EH oil system, gas turbine control oil system.

Industrial equipment: regeneration and purification of fire-resistant oil in hydraulic system and lubrication system.

Petrochemical field: continuous purification and maintenance of fire-resistant oil under high temperature and high pressure environment.

 

Installation direction: The filter element must be installed correctly according to the oil flow direction mark to avoid reverse use.

System matching: It is recommended to form a multi-stage regeneration system with diatomaceous earth filter element 30-150-207, precision filter 01-094-006, etc. to achieve the best purification effect. Choose Yoyik as the exclusive agent of Nugent filter elements in China.

Replacement cycle: According to the oil acid value, moisture and pressure difference monitoring results, it is generally recommended to replace it every 6-12 months or when the pressure difference is ≥0.3 MPa.

Storage conditions: Unopened filter elements must be stored in a dry, light-proof environment to avoid moisture or high temperature.

 

Regularly monitor the oil acid value, resistivity and moisture content to evaluate the adsorption status of the filter element.

When replacing the filter element, it is necessary to drain the old oil and clean the filter housing to prevent the backflow of pollutants.

Discarded filter elements should be handled according to environmental protection requirements to avoid direct contact with the skin or environmental discharge.