The Power station EH oil regeneration cellulose filter element PYX-1266 is installed in the fiber filter of the power station to remove the metal particles produced by the wear of the components in the EH oil regeneration device, as well as the rubber impurities of the seal wear and so on.

 

  Power station EH oil regeneration device: A set of EH oil regeneration device is installed next to the fuel tank to store adsorbent and regenerate anti-fuel oil. It consists of diatomite filter (to keep oil neutral, filter out water, etc.) and fiber Filters (removing impurities) are composed in series. When putting into the regeneration device, the bypass door of the diatomite filter should be opened to fill the diatomite filter with oil, then the inlet door of the diatomite filter should be opened, and the bypass door should be closed. When the oil temperature is between 43-54°C and the pressure of any filter is as high as 0.21Mpa, the filter element needs to be replaced.

 

 

oil filter Q2U-H400*10FS

oil filter Q2U-H400*20FS

oil filter Q2U-H400*30FS

oil filter Q2U-H63*10S

oil filter Q2U-H63*20S

oil filter Q2U-H63*30S

filter 2-5685-0384-99

oil filter Q2U-H630*10FS

oil filter Q2U-H630*20FS

oil filter Q2U-H630*30FS

oil filter Q2UI-A10*10S

oil filter Q2UI-A10*20S

oil filter Q2UI-A10*30S

oil filter Q2UI-A100*10S

oil filter Q2UI-A100*20S

oil filter Q2UI-A100*30S

oil filter Q2UI-A160*10S

oil filter Q2UI-A160*20S

oil filter Q2UI-A160*30S

oil filter Q2UI-A25*10S

oil filter Q2UI-A25*20S

oil filter Q2UI-A25*30S

oil filter Q2UI-A250*10S

oil filter Q2UI-A250*20S

oil filter Q2UI-A250*30S

oil filter Q2UI-A40*10S

oil filter Q2UI-A40*20S

DFYLSYC-2023-03-29-A